THE H-SERIES
HORIZONTAL BAND SAWS
Hyd-Mech Horizontal Band Saws
Big, exceptional straight cuts found right here! Designed for multi-shift, high-production environments, Hyd-Mech H-Series saws are horizontal, guillotine saws that deliver big straight cuts – up to 80” – fast. The H-Series is available in semi-automatic and fully-automatic modes of operation with cutting capacities up to 80”
The H-Series saws are tough machines, designed to handle the demands of fabricators, steel service centres, machine shops, forging and die shops, and metal service centres. H-Series cuts solids, tubing, channels, angles, aircraft grade materials, as well as non-ferrous, stainless, and Hi-Temp alloys. This series is ideal for completing multiple slugging of parts, rounds, squares and structural material.
Hyd-Mech features the following H series, horizontal band saws in our product line-up:
- H-10A
- H-14A
- H-18A
- H-18A-120
- H-22A
- H-22A-120
- H-28A
- H-28A-120
- H-32A
- H26/42
- H-40/40
- H-40/60
- H-40/80
H-10A
SEMI-AUTOMATIC VERTICAL BAND SAW
The H-10A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications.
The H-10A is fast, with its high speed shuttle feed indexing up to 24″ in a single movement. Its standard split front vise delivers a short material remnant length, reducing material waste.
Featuring a 10″ x 10″ capacity, 5 HP motor, and 1 1/4″ blade, the H-10A is a reliable choice for your horizontal metal cutting applications.
Featured Specifications
Capacity at 90: | Rectangular | 10″ x 10″ |
Round | 10″ | |
Blade Size: | 1 1/4″ | |
HP: | 5 HP | |
Operation: | Semi-Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 5 Hp motor with A/C inverter
- Positive down feed system
- Stepper driven shuttle vise with ball screw mounted on linear rails with 24″ single stroke (multi-indexing)
- Out of stock switch
- Cast iron guide arms supported by two linear bearings
- Replaceable carbide guide inserts
- Split front vise
- Blade breakage switch
- Blade brush
- Power driven chip auger
- PLC controls with 99 job storage and job queue function
- Halogen work light
- Flood coolant system
- Wash down hose
- *New* Blade deviation monitor
- Power transformer
- Laser light
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Vertical rollers
- Idler & powered conveyors
H-14A
AUTOMATIC HORIZONTAL BAND SAW
The H-14A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications.
The H-14A is fast, with its high speed shuttle feed indexing up to 34″ in a single movement. Its standard spilt front vise delivers a short material remnant length, reducing material waste.
Featuring a 14″ x 14″ capacity, 7.5 HP motor, and 1 1/4″ blade, the H-14A is a reliable choice for all your horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 14″ x 14″ |
Round | 14″ | |
Blade Size: | 1 1/4″ | |
HP: | 7.5 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 7.5 HP motor with A/C inverter
- Mitsubishi PLC controls 999 jobs and 10 job queue functions
- Shuttle vise mounted on linear rails with 34″ single stroke (multi-indexing)
- Positive down feed system
- Cast iron guide arms supported by two linear bearings
- Replaceable carbide guide inserts
- Split front vise
- Blade breakage switch
- Blade brush
- Hydraulic chip auger
- Halogen work light
- Flood coolant system
- Wash down hose
- *New* Blade deviation monitor
- *New* Out of stock switch
- Laser light
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Vertical rollers
- Idler & powered conveyors
H-18A
AUTOMATIC HORIZONTAL BAND SAW
The H-18A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications.
The H-18A cuts fast, with its high speed shuttle feed indexing up to 34″ in a single movement. Its standard split front vise delivers a short material remnant length, reducing material waste.
Featuring an 18″ x 18″ capacity, 10 HP motor, and 1 1/2″ blade, the H-18A is a reliable choice for all your horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 18″ x 18″ |
Round | 18″ | |
Blade Size: | 1 1/2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP motor with A/C inverter
- 34″ shuttle stroke
- Split front vise
- Full capacity, full stroking hydraulic vises
- Carbide guides
- Powered blade brush driven off band wheel
- Hydraulic blade tensioning
- PLC Control
- Flood coolant system
- Work light
- Blade breakage switch
- Hydraulically driven chip auger
- Direct down feed providing easy adjustment of both head feed rate and cutting pressure
- *New* High resolution feed rate valve
- Blade deviation monitor
- Out of stock switch
- Laser light
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Vertical rollers
- Idler & powered conveyors
H-18A-120
HORIZONTAL LONG BAR FEED BAND SAW
The H-18A-120 is an automatic horizontal long bar feed band saw providing accurate 90° metal cutting for medium to heavy-duty applications.
The H-18A-120 cuts fast, with its high speed shuttle feed indexing up to 120″ in a single movement. Its standard split front vise delivers a short material remnant length, reducing material waste.
Featuring an 120″ bar feed, 18″ x 18″ capacity, 10 HP motor, and 1 1/2″ blade, the H-18A-120 is a reliable choice for all your horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 18″ x 18″ |
Round | 18″ | |
Blade Size: | 1 1/2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP motor with A/C inverter
- 120″ shuttle stroke
- Split front vise
- Full capacity, full stroking hydraulic vises
- Carbide guides
- Powered blade brush driven off band wheel
- Hydraulic blade tensioning
- PLC Control
- Flood coolant system
- Work light
- Blade breakage switch
- Hydraulically driven chip auger
- Direct down feed providing easy adjustment of both head feed rate and cutting pressure
- 120″ bar feed
- *New* Laser light
- *New* Full capacity hydraulic overhead bundling
- Blade deviation monitor
- Out of stock switch
- Mist lubrication
- Variable vise pressure
- Vertical rollers
- Idler & powered conveyors
H-22A
AUTOMATIC HORIZONTAL BAND SAW
The H-22A is an automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-22A is fast, with its high speed shuttle feed indexing up to 34″ in a single movement. Its optional 6° degree canted head, recommended when cutting larger beams, structural steel, and bundles of square tubing allows for more efficient cutting and improved blade life.
Featuring a 22″ x 22″ capacity, 10 HP motor, and 2″ blade, the H-22A is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 22″ x 22″ |
Round | 22″ | |
Blade Size: | 2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP motor with A/C inverter
- 34″ shuttle stroke
- Split front vise
- Hydraulic carbide guides
- Powered blade brush
- Hydraulic blade tensioning
- PLC 100 controls
- Full capacity, full stroking hydraulic vises
- Flood coolant system
- Work light
- Blade breakage switch
- Hydrualically driven chip auger
- Direct down feed providing easy adjustment of both head feed rate and cutting pressure
- *New* High resolution feed rate valve
- 6 degree canted head
- Blade deviation monitor
- Out of stock switch
- Outboard vise
- Laser light
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Vertical rollers
- Idler & powered conveyors
H-22A-120
HORIZONTAL LONG BAR FEED BAND SAW
The H-22A-120 is a heavy-duty, automatic, horizontal long bar feed band saw designed to provide exceptional cutting performance in multi-shift, high production environments. This highly versatile guillotine style machine can be utilized for a wide variety of material applications, ranging from mild steels and aluminums to stainless, tool steels and more exotic high temperature alloys. No matter what the application it can provide cut quality that is second to none.
The machine’s PLC 100 controller can be easily programmed for up to 99 different jobs. The easy programming of the E 300 interface, and the user-friendly manual control switches make for minimum job setup time and cost effective operation. The full capacity hydraulic overhead bundling clamps provide for efficient high production cutting of various material bundles.
The H-22A-120 is fast, with its high speed shuttle feed indexing up to 1204″ in a single movement. Its standard 6° degree canted head allows for more efficient cutting and improved blade life.
Featuring a 20″ x 22″ capacity, 10 HP motor, and 2″ blade, the H-22A-120 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 22″ x 22″ |
Round | 22″ | |
Blade Size: | 2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP motor with A/C inverter
- 120″ shuttle stroke
- Split front vise
- Hydraulic carbide guides
- Powered blade brush
- Hydraulic blade tensioning
- PLC 100 controls
- Full capacity, full stroking hydraulic vises
- Flood coolant system
- Work light
- Blade breakage switch
- Hydrualically driven chip auger
- Direct down feed providing easy adjustment of both head feed rate and cutting pressure
- 6 degree canted head
- Full capacity hydraulic overhead bundling
- *New* Laser light
- Blade deviation monitor
- Out of stock switch
- Outboard vise
- Mist lubrication
- Variable vise pressure
- Vertical rollers
- Idler & powered conveyors
H-28A
AUTOMATIC HORIZONTAL BAND SAW
The H-28A is an automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-28A is fast, with its high speed shuttle feed indexing up to 32″ in a single movement. A 5 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Hyd-Mechs direct down feed system provides easy adjustment of both head feed rate and cutting pressure.
Featuring a 28″ x 28″ capacity, 10 HP motor, and 2″ blade, the H-28A is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 28″ x 28″ |
Round | 28″ | |
Blade Size: | 2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP variable frequency drive motor
- 32″ single stroke, multi-index capability shuttle
- Carbide guides
- Hydraulic driven blade brush
- Hydraulic blade tensioning
- PLC control
- Hydrualically driven chip auger
- Flood coolant
- Wash down hose
- Work light
- Blade breakage switch
- 6 degree canted head
- Blade deviation monitor
- Out of stock switch
- Outboard vise
- Laser light
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Roller outfeed table
- Pedestal control console
- Vertical rollers
- Idler & powered conveyors
H-28A-120
HORIZONTAL LONG BAR FEED BAND SAW
The H-28A-120 is an automatic horizontal long bar feed band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-28A-120 is fast, with its high speed shuttle feed indexing up to 120″ in a single movement with weight capacities up to 15,000 lbs. A 5 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Hyd-Mechs direct down feed system provides easy adjustment of both head feed rate and cutting pressure.
Featuring a 120″ bar feed, 24″ x 28″ capacity, 10 HP motor, and 2″ blade, the H-28A-120 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 24″ x 28″ |
Round | 28″ | |
Blade Size: | 2″ | |
HP: | 10 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 10 HP variable frequency drive motor
- 120″ single stroke, multi-index capability shuttle
- Carbide guides
- Hydraulic driven blade brush
- Hydraulic blade tensioning
- PLC control
- Hydrualically driven chip auger
- Flood coolant
- Wash down hose
- Work light
- Blade breakage switch
- 120″ bar feed
- 6 degree canted head
- Full capacity hydraulic overhead bundling
- Blade deviation monitor
- Out of stock switch
- Outboard vise
- Laser light
- Mist lubrication
- Variable vise pressure
- Squaring vise
- Vertical rollers
- Idler & powered conveyors
H-32A
AUTOMATIC HORIZONTAL BAND SAW
The H-32A is an automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-32A is fast, with its high speed shuttle feed indexing up to 32″ in a single movement. A 5 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Hyd-Mechs direct down feed system provides easy adjustment of both head feed rate and cutting pressure.
Featuring a 32″ x 32″ capacity, 20 HP motor, and 2 5/8″ blade, the H-32A is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 32″ x 32″ |
Round | 32″ | |
Blade Size: | 2 5/8″ | |
HP: | 20 HP | |
Operation: | Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 20 HP variable frequency drive motor
- 32″ single stroke, multi-index capability shuttle
- Carbide guides
- Hydraulically driven blade brush
- Hydraulic blade tensioning
- PLC 100 control
- Chip auger
- Flood coolant
- Wash down hose
- *New* Laser light
- 6 degree canted head
- Blade deviation monitor
- Out of stock switch
- Outboard vise
- Mist lubrication
- Variable vise pressure
- Full capacity hydraulic overhead bundling
- Roller outfeed table
- Vertical rollers
- Idler & powered conveyors
H-26/42
SEMI-AUTOMATIC HORIZONTAL BAND SAW
The H-26/42 is a semi-automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
Its 12° degree canted head allows for more efficient cutting and improved blade life. A 5 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Hyd-Mechs direct down feed system provides easy adjustment of both head feed rate and cutting pressure.
Featuring a 26″H x 42″W capacity, 20 HP motor, and 2 5/8″ blade, the H-26/42 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 26″ x 42″ |
Round | 30″ | |
Blade Size: | 2 5/8″ | |
HP: | 20 HP | |
Operation: | Semi-Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 20 HP VFD blade drive
- Descent meter
- 3 HP hydraulic drive
- 12° canted head
- Hydraulic guide arm positioning
- Carbide guide inserts
- 4″ hydraulically driven blade brush
- Hydraulic blade tensioning
- Blade breakage switch
- Chip auger
- Flood coolant
- Wash down hose
- Direct down feed providing easy adjustment of both head feed rate and cutting pressure
- *New* Laser light
- Outboard vise
- Mist lubrication
- Pedestal control console
- Hydraulic overhead clamp
- Idler & powered conveyors
H-40/40
SEMI-AUTOMATIC HORIZONTAL BAND SAW
The H-26/42 is a semi-automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
Its 12° degree canted head allows for more efficient cutting and improved blade life. A 5 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Hyd-Mechs direct down feed system provides easy adjustment of both head feed rate and cutting pressure.
Featuring a 26″H x 42″W capacity, 20 HP motor, and 2 5/8″ blade, the H-26/42 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 40″ x 40″ |
Round | 40″ | |
Blade Size: | 3″ | |
HP: | 20 HP | |
Operation: | Semi-Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 20 HP motor with A/C inverter
- 8′ VFD controlled power rollers
- Carbide guides
- Hydraulically driven blade brush
- Hydraulic blade tensioning
- Flood coolant
- Wash down hose
- *New* Laser light
- Outboard vise
- Idler & powered conveyors
H-40/60
SEMI-AUTOMATIC HORIZONTAL BAND SAW
The H-40/60 is a semi-automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-40/60 has a workload capacity of 50,000 lbs. A 5 HP driven hydraulic pump supplies system pressure through 3-position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Its PLC control digitally displays blade speed, feed rate, head up limit position, and cut elapsed time, and time remaining.
Featuring a 40″H x 60″W capacity, 20 HP motor, and 3″ blade, the H-40/60 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
Image shown is of the H-40/40 model
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 40″ x 60″ |
Round | 40″ | |
Blade Size: | 3″ | |
HP: | 20 HP | |
Operation: | Semi-Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 20 HP motor with A/C inverter
- 8′ VFD controlled power rollers
- Carbide guides
- Hydraulically driven blade brush
- Hydraulic blade tensioning
- Flood coolant
- Wash down hose
- *New* Laser light
- Outboard vise
- Idler & powered conveyors
H-40/80
SEMI-AUTOMATIC HORIZONTAL BAND SAW
The H-40/80 is a semi-automatic horizontal band saw providing accurate 90° metal cutting for heavy-duty applications.
The H-40/80 has a workload capacity of 50,000 lbs. A 5 HP driven hydraulic pump supplies system pressure through 3-position directional valves controlling all vising, head up/down, blade tension, guide arm, and shuttle movement.
Its PLC control digitally displays blade speed, feed rate, head up limit position, and cut elapsed time, and time remaining.
Featuring a 40″H x 80″W capacity, 20 HP motor, and 3″ blade, the H-40/80 is a reliable choice for all your heavy-duty horizontal metal cutting applications.
CUTTING
Cut solids, tubing, channels, angles, aircraft grade materials, non-ferrous, stainless, and hi-temp alloys.
Featured Specifications
Capacity at 90: | Rectangular | 40″ x 80″ |
Round | 40″ | |
Blade Size: | 3″ | |
HP: | 20 HP | |
Operation: | Semi-Automatic | |
Mitering: | 90° straight cuts |
Standard & Optional Features
- 20 HP motor with A/C inverter
- 8′ VFD controlled power rollers
- Carbide guides
- Hydraulically driven blade brush
- Hydraulic blade tensioning
- Flood coolant
- Wash down hose
- *New* Laser light
- Outboard vise
- Idler & powered conveyors