CNC 300 Backgauge Control Upgrade Kit

(consists of CNC 300 Control, Backgauge Cable (MTC), All Relay Board, Relay Board Cable, Linear Scale Cable, Top Reference Switch, and Auto Advance Switch). CNC 300 is a control for Automec backgauges that can be programmed as simply as the CNC 150 or it can be programmed to use an array of sophisticated functions. CNC 300 will control any of the Automec backgauge configurations as either a 1-axis (backgauge), 2-axis (ram control) or 3-axis (programmable gauge bar height). This control carries a 2 year warranty. Ram display can show true ram position in depth or angle. Single entry ram offset and bend allowance included All ram dimensions can be offset +/- .393″ with one data entry RS232 interface and software 300 jobs (00 to 299) Automatic ram calibration to tool heights 10 bends per job (linking available) .001″ resolution Tool library Red L.E.D. display Depth or angle mode IN/MM conversion Programmable delay / retract between bends (0-19 sec.) Tactile feel push buttons Bend allowance +/- .393″ 30 day battery backup Calculator to change dimensions incrementally Input power – 115 VAC +/- 10% 50/60 HZ, 7A Angle adjust for angle correction 24″ or 48″ backgauge Backguage reversal on pinch point (time and distance) 11 digit job number Parts counter 1,2, or 3 axis available